Features and MenuCards Main Menu
109
to be played at the same speed (played as cadences). The
setting in the Configurator also affects melodies on system
telephones if selected, so that you may only hear parts of
some melodies.
4ƒMessage ring tone
: You can set different ringer signals to signal messages
on your system telephone or calls for members of your pick-up group. These can
then be distinguished from one another.
Select
1ƒShort messages
,
2ƒE-Mail
,
3ƒPick-up
or
4ƒVoicebox
. For each
type of message you can specify
1ƒVolume
and
2ƒMelody
or a short beeping
tone instead of a melody. The short beeping tone is the default setting for all mes-
sages. Use the
= keys to select a different setting.
Note: When configuring the pick-up groups in your
OpenCom 100’s Configurator, your system administrator can
also specify that calls for members of your pick-up group be
displayed on your system telephone as well.
5ƒEn-bloc dialling
: This switches your telephone to automatic dialling (
On
)
or direct dialling (
Off
).
6ƒCharge settings
: You can view call-charge data if your network operator
transmits them. Switch on this function by selecting
Charge
, switch to
Duration
to show the length of calls, or to
Off
to switch off this function.
7 Headset
: If you use a headset with your system telephone, you can switch this
function on and off here. When the headset is switched on you can make and
accept calls by pressing the headset key
K. To switch this function on and off
select
1ƒHeadset
and then the option
On
or
Off
. If Option
1ƒHeadset
is
switched off, the headset key on your system telephone will not function. You can
adjust the volume of the headset and the microphone to six different levels using
the menu items
2 Receiver vol.
and
3ƒSender vol.
. Use the plus/minus
key
= to adjust the volume, or enter a number between 0…5.
8ƒDisplay:
Select
1ƒContrast
or
2ƒLanguage
.
Contrast
lets you adjust
the contrast levels of the display using the
= keys (or by entering a
number from
0… 9).
Language
enables you to directly select the
display language from the list of available languages.
If your OpenPhone 75 has had one or more keypad extensions added to it, the
contrast levels of the display can be set separately for each keypad extension.
Select
1ƒContrast
and select the relevant
Expansion
from the menu that
To Next Page
Loading...
