Telephoning In a hurry?: A Brief Explanation of Important Functions
42
2.1.6 Querying/Toggling, Transferring
Querying and Toggling
During one call you may make another call: e. g. to obtain information:
Transferring a Call to an Internal Subscriber
You may transfer a call to another internal subscriber with or without advance
notice. To do this, you begin by initiating a query connection:
To initiate a query:
GR Press the R-key.
Z Dial internal or external call number.
The first caller is placed on hold and you now may speak with
the second caller.
You may switch back and forth between calls, speaking alter-
natively with both callers. To alternate between callers (to
toggle):
R G Press the R-key (repeat to toggle).
To end query:
T Press the disconnect key.
RG Press the R-key.
Now you may speak with the first caller again.
GR Press the R-key. The subscriber you were talking to before is
put on hold.
Z Dial the internal call number.
If the internal subscriber answers,
G h Inform them that you are transferring a call and replace the
handset in the telephone cradle.
If the internal subscriber does not answer,
To Next Page
Loading...
