Telephoning Enquiry, Toggling, Transfer and Conference
68
2.5.4 MenuCard “Subscr (Subscriber) on hold”
R
You are making an internal or external enquiry call (the R-key is
depressed) …
MBriefly press the MenuCard key, then select the following from the
Subscr
on hold
MenuCard …
Transfer
: You connect the subscriber on hold to the subscriber with whom you
are currently speaking.
Conference
: This initiates a three-party conference.
Toggle
: This function enables you to switch between the subscriber with whom
you are currently speaking, and the one with whom you last spoke.
Park call
: You can “park” one or more calls and make other phone calls in the
meantime (see MenuCard “Conversation” starting on page 59).
Door opener
: This activates the door opener.
2.5.5 Internal/External Three-Party Conference
You have dialled an internal or external enquiry call (see the section entitled
Enquiry/Toggling by means of the R-Key or Another Call Key starting on page 66).
Note: Interconnecting the two conference subscribers or re-
moving one of them from the conference is only possible us-
ing the appropriate menu item in the MenuCard.
G If the subscriber answers, inform them of the conference and
P Select the
Conference
menu item from the MenuCard
Subscr on hold
. The conference is started.
h/T End the conference by hanging up or pressing the dis-
connect key.