OpenPhone 71/73/75 System Telephones Display and MenuCards
24
For the System Administrator: Configuring the Display of the User Name and
the Date
Assign the user name in the Configurator, User Manager: User menu. Configure
the display of the date in the info line of the OpenPhone 71/OpenPhone 73 system
telephones in the Configurator, PBX Configuration: System: Settings menu.
The OpenPhone 75’s display in call state:
a Info lines
During a call, the current charge counter (if configured) and annotation texts are
displayed. During an enquiry call you will see the number of the enquiry call you
dialled. On the OpenPhone 75 the second info line is used to display connection
information also, you can, for example, view the capacity status of a call queue.
1.3.3 Key Lines
The display next to the keys is assigned to them on a line-by-line basis. Depending
on the type of key, the following display texts are shown.On the On the
OpenPhone 71 the display always shows the active line.
Note: The call and seizure states are identified by additional
symbols on the call keys. For details, refer to the section enti-
tled Telephoning starting on page 37.
ESC OK
Incom..int..call
Operator
11:45
Mon.01.Jan.06
a
To Next Page
Loading...
