Team Functions Programming the Call Keys
92
select
Acoustic after delay
, specify the number of seconds after which
your telephone is to ring.
5 Call protect
: Switch call protection
On
or
Off
for all calls, for internal calls
only, or for external calls only. If call protection has been activated, this trunk key
will only indicate calls by means of a visual signal, even if they are made from a
direct-call key.
6 Ring tone
: You can set the
Volume
and
Melody
for different types of
incoming calls (
1ƒExternal calls
,
2ƒInternal calls
,
3ƒVIP call
,
4ƒDoor call
)for each trunk key. Proceed as described in the section “2 Ring
Tone” on page 108.
7 Charges
: For each trunk key, you can view the charges for the last call as well
as the total charges.
8ƒCall wait. prot.
: While you are making a call, other calls for the call
number of this trunk key are not signalled by a call waiting tone. The caller hears
the busy tone.
Note: If the internal call number of this trunk key is config-
ured on several telephones, call waiting protection is also ac-
tivated on these telephones.
4.2.2 MenuCard “Prog. team key”
g
Long press the team key, then select …
1 Modify text
: The text currently assigned to the key is shown on the display
of your telephone. To change the text, press
O. Delete the existing text with
the
C key and enter new text, if required. Press O and confirm this with
Save
. If you delete the text, only the key’s call number will be displayed.
2 Call signalling
: Specify whether call signalling to this key is to be
Opticalƒ&ƒacoustic
,
Optical only
or
Acoustic after delay
. If you
select
Acoustic after delay
, specify the number of seconds after which
your telephone is to ring.
3 Call protect
: Switch call protection
On
or
Off
for all calls, for internal calls
only, or for external calls only. If call protection has been activated, this team key
To Next Page
Loading...
