Features and MenuCards Programming Keys
123
Changing Destination Key
Deleting a Programmed Key
6.4.2 Programming Functions (Features)
You can also store Main menu functions on programmable keys (see MenuCard
“Main Menu” starting on page 98 and the overview of the menu in the appendix
on page 132). Long press the key and you will see the feature key’s MenuCard with
the name of the function in the first line (e. g. call forwarding). You can change the
function as required (e. g. change the destination of the call forwarding).
Switching Functions On/Off
The functions assigned to a key can be activated by a short press on the key or
switched on and off by pressing the key (e. g. call forwarding). The function
assigned to a key is active (switched on) when the key’s LED lights up. If the pro-
PO Select the
Phone book
menu entry and then the desired
entry. Then press the OK key.
PO If there are multiple call numbers saved to this entry, select
the call number you would like to save to the destination
key. Then press the OK key.
P O To end programming, select the
Save
menu item. Then
press the OK key. The programming is saved.
g To change or delete a destination key, long press the key,
then …
Z O
Text:
/
Dest.:
Overwrite the programmed name / call
number. Confirm each entry by pressing the OK key.
P O Select the
Save
menu item. Then press the OK key. The pro-
gramming is saved.
g Long press the programmable key, then …
P select
Delete key
.
O Press the OK key.
To Next Page
Loading...
