Features and MenuCards Programming Keys
124
grammed function conflicts with your terminal’s current settings, a menu will
open when you press the relevant feature key. You can use this menu to activate or
deactivate the function again.
The following examples will help to explain this.
Example 1 “Forwarding MSN Groups”
If you have assigned an MSN group to a feature key, the LED lights up if all
MSNs in the group are forwarded to the destination number specified. If a
single MSN is forwarded to a different number or not forwarded, the LED does
not light up.
If you now press the feature key, a menu opens in which you can activate or
deactivate the function again. The destination numbers for the individual
MSNs of the group are overwritten and will have to be reprogrammed if
required. Selecting
On
will forward all MSNs in the group to the originally pro-
grammed destination number, or you can specify a new destination number.
Selecting
Off
will deactivate all forwarding for all MSNs in the group.
Example 2 “Call Waiting Protection”
If you have assigned “Call waiting protection phone” to a feature key, the LED
lights up if call waiting protection is activated for all the call keys on your tele-
phone. If you deactivate call waiting protection for a single call key (“Call
waiting protection key”), the LED goes out.
If you now press the feature key, a menu opens in which you can activate or
deactivate the function. The “Call waiting protection key” is then deleted and
will have to be reprogrammed if required.
With the
On
menu item you turn on call-waiting protection for all call keys.
With the
Off
menu item you turn off call-waiting protection for all keys.
Programming a Function onto a Key
g Long press the programmable key, then …
PO select
Features
and press the OK key.
PZO Select the desired function from the MenuCards, specify the
variable part (e. g. call number) if required, then press the OK
key.
To Next Page
Loading...
