Features and MenuCards Programming Keys
127
■ Short key press: The programmed entries are displayed in a selection menu.
Select the desired entry and press the OK key
O. The programmed call
number will be dialled or the programmed function executed.
■ Long key press: The MenuCard for the key will be opened. You can now edit
the stack’s entries.
The illuminated LED of a key programmed as a link indicates that all functions of
the link are active (switched on). You can use a key programmed as a Link as
follows:
■ Short key press: The programmed functions are executed consecutively.
When all functions have been executed correctly, you will hear a positive
acknowledgement tone.
■ Long key press: The key’s MenuCard will open. You can now edit the link’s
functions.
Changing Entries in a Stack / Link
You can change or delete individual entries in a stack or a link without deleting all
the programming on the key.
Deleting a Programmed Feature Key (Stack / Link)
g Long press the programmed key, then …
PO select the desired entry. To change the entry, press the OK
key.
PZ Select another function or change the programmed call
number (for a destination key). To delete the entry, press the
Ckey.
O Press the OK key to save your programming.
g Long press the programmed key, then …
P select
Delete key
.
O Press the OK key.
To Next Page
Loading...
