Features and MenuCards Main Menu
114
will be deactivated automatically. To manually deactivate the dialout
beforehand, use the
Off
option.
Tip: The destination call number you select for the dialout can
also be a call number saved in the phone book or is entered
on a call list (re-dial list, call list when absent, call list of ac-
cepted calls and voicebox messages). To do so, save the
Re-
mote dialling…
feature to a function key (please refer to
Programming Functions (Features) starting on page 123 also).
When programming, enter the device ID of the other terminal
but not the destination call number. You can now initiate a re-
spective dial-out for this terminal by first selecting a call
number from one of the lists or from the phone book and
then press the function key. You can, of course, enter other
destination call numbers. To do so, first press the function key
and then enter the desired call number under
Dest.:
.
Select
3ƒNot available
, followed by …
■
1ƒCallback
: This leaves a call-back request with another subscriber whose
line is busy to call you back (not possible with hunt group numbers).
■
2ƒVIP call…
: Your call is acoustically signalled, even if the person whose
internal number you are calling has switched on call waiting protection, call
protection or call forwarding.
Select
4ƒCall
, followed by …
■
1ƒToggle
: This toggles between current and previous callers.
■
2ƒTransfer
: This connects the caller on hold with the current caller.
■
3ƒConference
: This initiates a three-way conference.
■
4ƒMute
: This switches the microphone in the handset or in the telephone
On
/
Off
.
■
5ƒHold
: Hold is a team function. The caller is put on hold and can now be
transferred to another member of the team (see also the section on Holding
and Transferring Calls with a Feature Key starting on page 90).
To Next Page
Loading...
