Features and MenuCards Main Menu
119
cally according to a timetable drawn up by the system administrator, or it can be
done manually.
You can only programme these functions if the system administrator has activated
the “Time control” authorisation for your user group.
Select the
Automatic
item to activate automatic time control. The configured
time groups then change automatically according to the timetable configured by
the system administrator. This setting remains active until one of the available
time groups is set manually.
The system administrator can configure up to ten time groups. The time groups
are either numbered (default setting) or named by the system administrator. You
can select a specific time group manually, which deactivates the automatic time
control.
Note: “MSN” forwarding always remains in effect, regardless
of the currently active time group.
2ƒDate/Time
: The date and time are taken from the exchange with the first
external outgoing call. If your network operator does not transmit this infor-
mation, you can set the date and time here yourself.
You can only programme these functions if the system administrator has activated
the “Configurator - active” authorisation for your user group.
Select the required entry (time with
hh:mm
, date with
dd.mm.yy
) and
press
O. Overwrite the current setting, confirm the new setting with O
and
Save
your settings.
To Next Page
Loading...
