ABB 800xA - Archive Functions Supported by the Archive Device Aspect - Main View

User Interface for Managing Archive Data Section 7 Configuring Archives
102 2PAA107563-600 B
Supported Functions.
The archive functions supported by this aspect are described in Table 8. These
functions are available through the context menu and Actions button as shown in
Figure 62.
Table 8. Archive Functions Supported by the Archive Device Aspect - Main View
Function Description
Opening an Archive Volume from the
Archive Device Aspect.
Alternative to accessing a volume
directly from the browser. To do this,
select the volume, then right click
and choose Open from the context
menu. This opens the aspect in a
separate window.
Remounting a Volume Volumes should be remounted prior to
initializing. Also, remount a volume to
refresh the volume information on the
archive device aspect.
Initializing an Archive Volume Each new archive volume must be
initialized prior to archiving data on it.
For scheduled archives, volumes are
automatically initialized if the device
behavior is set to Advance When Full or
Wrap When Full. For manual archives,
the volume must be manually initialized.
Archiving Logs Manually Alternative to scheduled archives.
Mark Volume Full Marks a volume full to prevent any
additional timed archives from writing to
the volume.
Publishing an Archive Volume Recommended method for making
archived numeric data available for data
access.