Section 7 Configuring Archives Maintaining Archive Media
2PAA107563-600 B 115
4. If the archive device aspect is being used, select and remount the volume. This
is not required when using the archive volume aspect.
Always remount a volume BEFORE initializing it from t
he archive device aspect.
The information in the archive device aspect is not automatically updated when a
new archive media is inserted, and so may not accurately indicate the current
Contents of the archive device. Remounting the volume will ensure that the selected
volume is actually installed in the archive device. To do this, select the volume, right
click and choose Remount from the context menu (Remounting a Volume on page
112).
5. If the archive device aspect is being used, once the volume has been
remounted, re-select the v
olume, right click and choose Initialize from the
context menu as shown in Figure 69.
Figure 69. Initializing the Selected Volume
6. Whether the archive volume aspect or the archive device aspect is being used,
invoking the Initialize command displays the Initialize Volume dialog as shown
in Figure 70.
Figure 70. Initialize Archive Media Window
To Next Page
Loading...
