330 Fieldbus control
*Object instance applies for US regional variant only.
Note: For Present Value Access Types, R = Read-only, W = Writeable, C =
Commandable. Commandable values support priority arrays & relinquish defaults.
AV27 EXT PID STPT Setpoint for external PID controller
(drive must be configured for BACnet
control).
Percent C
AV28* HEATING
CURRENT
Sets motor heating DC current
reference (percent of motor nominal
current).
Percent W
Instance
ID
Object Name Description Units
Present Value
Access Type
To Next Page
Loading...
