Introduction to the manual 23
• Maintenance and hardware diagnostics (page 353) contains preventive
maintenance instructions and LED indicator descriptions.
• Technical data (page 357) contains technical specifications of the drive, eg
ratings, sizes and technical requirements as well as provisions for fulfilling the
requirements for CE and other marks.
• Dimension drawings (page 379) shows dimension drawings of the drive.
• Appendix: Resistor braking (page 389) tells how to select the brake resistor.
• Appendix: Extension modules (page 393) describes the MPOW-01 auxiliary
power extension module. It mentions the MREL-01 relay output extension module
and MTAC-01 pulse encoder interface module briefly; readers are referred to the
corresponding user’s manual.
• Appendix: Safe torque off (STO) (page 399) describes STO features, installation
and technical data.
• Further information (inside of the back cover, page 405) tells how to make product
and service inquiries, get information on product training, provide feedback on
ABB Drives manuals and find documents on the Internet.
Related documents
See List of related manuals on page 2 (inside of the front cover).
Categorization by frame size
The ACS355 is manufactured in frame sizes R0…R4. Some instructions and other
information which only concern certain frame sizes are marked with the symbol of the
frame size (R0…R4). To identify the frame size of your drive, see the table in section
Ratings on page 358.
To Next Page
Loading...
