ABB ACS880-1607LC - Type Designation Information

Type designation labels
￭
Type designation label of the DC/DC converter unit
Each converter unit has a type designation label attached onto the inside of the cubicle
door. The type designation label includes the ratings, applicable markings, type
designation and serial number of the unit.
An example label is shown below.
1
2
3
4
5
6
7
Type designation1
Frame size2
Cooling system and other additional data3
Degree of protection4
Ratings5
Valid markings. See ACS880 liquid-cooled multidrives cabinets and modules electrical planning
instructions (3AXD50000048634 [English]).
6
Serial number. The first digit of the serial number refers to the manufacturing plant. The next
four digits refer to the unit's manufacturing year and week, respectively. The remaining digits
complete the serial number so that there are no two units with the same number.
7
￭
Type designation labels of the DC/DC converter module
Each DC/DC converter module has type designation labels attached to it. The type
designation stated on the labels contains information on the specifications and
configuration of the unit.
34 Operation principle and hardware description