ABB ACS880-1607LC - Option Codes

DescriptionCode
Construction: cabinet-installed liquid-cooled DC/DC converter unit. When no options
are selected: Supply frequency 50 Hz, control voltage 230 V AC, IP42, EN/IEC industrial
cabinet construction, power and control cabling through the bottom of the cabinet, DC
busbar material tin plated copper, cable supply conductors, standard wiring material,
ACS880 DC/DC converter control program, complete documentation in English on a
memory stick.
1607LC
Size
Refer to the ratings table in the technical data.xxxxx
Voltage range
DC voltage corresponding AC input voltages 3 ~ 380…500 V. This is indicated in the type
designation label as typical input voltage level 566 / 679 / 707 V DC.
5
DC voltage corresponding AC input voltages 3 ~ 525…690 V. This is indicated in the type
designation label as typical input voltage level 742 / 849 / 976 V DC.
7
Option codes
DescriptionCode
50 Hz supply frequencyA012
60 Hz supply frequencyA013
IP42 (UL Type 1 Filtered)B054
IP54 (UL Type 12)B055
Marine constructionC121
UL Listed (evaluated to both U.S. and Canadian safety requirements)C129
Marine type approval. Refer to ACS880…+C132 marine type-approved cabinet-built drives
supplement (3AXD50000039629 [English]).
C132
CSA approvedC134
Plinth height 100 mmC164
Door hinges on leftC176
Plinth height 200 mmC179
Marine product certification issued by DNV GLC205
Marine product certification issued by the American Bureau of Shipping (ABS)C206
Marine product certification issued by Lloyd's Register (LR)C207
Marine product certification issued by Bureau VeritasC209
Marine product certification issued by China Classification Society (CCS)C228
Marine product certification issued by Russian Maritime Register of Shipping (RS)C229
d u /d t filteringE205
Common mode filteringE208
EMC/RFI filter for 2nd environment TN (grounded) or IT (ungrounded) system, category C3E210
Internal charging circuitF272
Capability of ride-through in voltage break max. 3 s. without trippingF276
DC switch-disconnectorF286
DC switch-disconnector in DC feeder unitF290
Cabinet and module heating elements (external supply)G300
Cabinet lightingG301
Control (auxiliary) voltage 115 V ACG304
Operation principle and hardware description 37