5. Remove the screws (a) that hold the finger guard (b) and fan (c) to the fan
mounting plate (d).
6. Assemble the fan assembly with a new fan. The airflow direction of the fan must
be up.
7. Install the fan assembly into the cubicle
8. Connect the fan wiring.
￭
Frame R7i – internal module fan replacement
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
Maintenance 99
To Next Page
Loading...
