￭
Frame R7i cabinet fan replacement
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
WARNING!
Use the required personal protective equipment. Wear protective gloves and
long sleeves. Some parts have sharp edges.
1. Stop the drive and do the steps in section Electrical safety precautions (page 49)
before you start the work.
2. Open the cubicle door.
3. Disconnect the fan wiring.
4. Remove the six screws that attach the fan assembly to the heat exchanger. Then
remove the fan assembly from the cabinet.
98 Maintenance
To Next Page
Loading...
