ABB ACS880-M04 - Dimensions and Weights; Terminal and Lead-Through Data for Power Cables; Screwdrivers for the Terminals of Main Circuit

116 Technical data
Dimensions and weights
See also the Dimension drawings from page 181.
Terminal and lead-through data for power cables
Input, motor, resistor and DC cable, maximum wire sizes (per phase) and terminal
screw sizes and tightening torques (T) are given below.
Screwdrivers for the terminals of main circuit
Frame
size
H1 - Height
(without cable
clamp plates)
H2 - Height
(with cable
clamp plates)
W - Width D - Depth (with
control panel)
Weight
mm in mm in mm in mm in kg lbs
R1 364 14.33 480 18.89 90 3.54 237 9.33 3.2 7.1
R2 380 14.97 480 18.89 100 3.94 315 12.40 5.4 11.9
R3 467 18.37 558 21.96 168 6.60 316 12.44 15.6 34.4
R4 467 18.37 644 25.34 223 8.76 316 12.44 21.3 47.0
Frame size U1/2, V1/2, W1/2, UDC+/-, R+/- Grounding terminals
Max wire size T T
mm
2
N·m N·m
R1 4 0.5 ... 0.6 1.5
R2 10 1.2 ... 1.5 1.5
R3 70 15 3
R4 70 15 18
Frame size Screwdrivers
R1 4 mm slot
R2 5 mm slot
R3 4 mm Allen key (hexagonal socket)
R4 4 mm Allen key (hexagonal socket)
3AXD00000586715.xls F