ABB ACS880-M04 - Brake Resistors Data Table; Brake Resistors Degree of Protection

Resistor braking 177
Brake resistors data table
The ratings apply at an ambient temperature of 40°C (104°F).
R = Resistance of the listed resistor.
P
n
= Continuous power (heat) dissipation of the listed resistor when cooled naturally in a vertical
position.
E
pulse
= Energy pulse the listed resistor will withstand.
P
Rcont
= Continuous power (heat) dissipation of the resistor when placed correctly. Energy E
R
dissipates in 400 seconds.
E
R
= Short energy pulse that the resistor assembly withstands every 400 seconds. This energy
will heat the resistor element from 40°C (104°F) to the maximum allowable temperature.
Note: All brake resistors must be installed outside the drive module.
 Brake resistors degree of protection
Note: The SACE resistors are not UL listed.
Drive type
ACS880-M04
Example brake resistor
JBR-xx
Example brake resistor
SACExxxxx
Type R
(ohm)
P
n
(W)
E
pulse
(kJ)
Type R
(ohm)
P
Rcont
(kW)
E
R
(kJ)
-03A0-2, -03A0-5 JBR-01 120 105 22 - - - -
-03A6-2, -03A6-5
-04A8-2, -04A8-5
-06A0-2, -06A0-5
-08A0-2, -08A0-5
-010A-2, -010A-5 JBR-03 80 135 40 - - - -
-014A-2, -014A-5 JBR-04 40 360 73 SACE08RE44 44 1 210
-018A-2, -018A-5
-025A-2, -025A-5 JBR-05 20 570 77 SACE15RE22 22 2 420
-030A-2, -030A-5
-035A-2, -035A-5
-044A-2, -044A-5 JBR-06 13 790 132 SACE15RE13 13 2 435
-050A-2, -050A-5
-061A-2, -061A-5
-078A-2, -078A-5
-094A-2, -094A-5
3AXD10000434191
Resistor type Degree of protection
JBR-xx IP20
SACE IP21