36 Operation principle and hardware description
Type designation key
The type designation key tells you the specifications and configuration of the drive.
The table shows the primary drive variants.
Sample type code: ACS880-M04-04A8-5+XXXX
• The first digits from left indicate the basic configuration (ACS880-M04-04A8-5).
• The optional selections are given thereafter, preceded by + signs (e.g. +L501).
The main selections are described below.
Note: Not all selections are necessarily available for all types; refer to ACS880-
M04 ordering information, available on request.
Selection Alternatives
Product series ACS880
Type M04 Drive module.
When no options are selected: IP20 (UL Open Type), plain front
cover, no control panel, no mains choke (frames R1 and R2),
internal mains choke (frames R3 and R4), no EMC filter, internal
brake chopper, coated boards, Safe torque off, Primary control
program, Quick installation and start-up Guide.
Current rating 04A8 For example, 04A8 refers to a nominal output current of 4.8 A. See
Ratings on page 110.
Voltage range 2
5
200…240 V
380…500 V
Option codes (plus codes)
Filters E... +E200: EMC filter, C3, 2nd Environment, Unrestricted (Earthed
network) (External with frames R1 and R2, internal with frames R3
and R4)
Control panel and
front cover
options
J... +0C168: No drive module front cover, no control panel
+J400: Control panel mounted on drive module front cover
+J410: Control panel with door mounting platform kit including 3 m
cable
+J414: Control panel mounting platform on drive module (no
control panel included)
Fieldbus K... +K451: FDNA-01 DeviceNet adapter module
+K452: FLON-01 LonWorks® adapter module
+K454: FPBA-01 PROFIBUS DP adapter module
+K457: FCAN-01 CANopen adapter module
+K458: FSCA-01 Modbus/RTU adapter module
+K473: FENA-11 Ethernet/IP™, Modbus/TCP and PROFINET IO
adapter module
+K469: FECA-01 EtherCAT® adapter module
To Next Page
Loading...
