About the manual 21
About the manual
Contents of this chapter
This chapter describes the intended audience and contents of this manual. It contains
a flowchart of steps in checking the delivery, installing and commissioning the drive.
The flowchart refers to chapters/sections in this manual and other manuals.
Applicability
This manual applies to the ACS880-M04 drive module of frame sizes R1 to R4.
Intended audience
This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown
wherever appropriate.
Categorization according to frame size
The ACS880-M04 drive is manufactured in frame sizes R1 to R4. Some instructions,
technical data and dimensional drawings which concern only certain frame sizes are
marked with the symbol of the frame size (R1, R2, R3, R4). The frame size is marked
on the drive designation label. See also the frame size of each drive type in the
ratings tables in chapter Technical data.
To Next Page
Loading...
