Technical data 133
Applicable standards
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standard EN 61800-5-1.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems.
Part 5-1: Safety requirements – electrical, thermal
and energy.
EN 61800-3:2004 + A1:2012 Adjustable speed electrical power drive systems.
Part 3: EMC requirements and specific test
methods.
EN 60204-1:2006 + A1:2009 + AC:2010 Safety of machinery. Electrical equipment of
machines.
Part 1: General requirements. Provisions for
compliance: The final assembler of the machine
is responsible for installing
• emergency-stop device
• supply disconnecting device
• the drive module into a cabinet
E N 6 0 5 2 9 : 1 9 9 1 + A 1 : 2 0 0 0 + A 2 : 2 0 1 3 Degrees of protection provided by enclosures (IP
code)
UL 61800-5-1:2012 UL Standard for Safety. Adjustable speed
Electrical Power Drive Systems – Part 5-1: Safety
Requirement – Electrical, Thermal and Energy.
CSA C22.2 No. 274-13 Adjustable speed drives
To Next Page
Loading...
