22 About the manual
Categorization according to the + code
The instructions, technical data and dimensional drawings which concern only certain
optional selections are marked with + codes, e.g. +L500. The options included in the
drive can be identified from the + codes visible on the type designation label of the
drive. See the + code selections listed in Type designation label on page 35.
Contents of the manual
This manual consists of the following chapters:
Safety instructions give safety instructions for the installation, commissioning,
operation and maintenance of the drive.
About the manual describes the applicability and intended audience of this manual. It
also includes a flow chart of steps to check the delivery of the drive for installing and
commissioning.
Operation principle and hardware description describes the drive module.
Planning the cabinet installation guides in planning the installation of the drive module
into a user-defined cabinet.
Mechanical installation instructs how to place and mount the drive.
Planning the electrical installation instructs on the motor and cable selection, the
protections and the cable routing.
Electrical installation instructs on how to wire the drive.
Installation checklist contains a list for checking the mechanical and electrical
installation of the drive.
Start-up refers to the start-up instructions of the drive.
Maintenance lists periodic maintenance actions along with work instructions.
Technical data contains technical specifications of the drive, for example, ratings,
sizes, technical requirements and provisions for fulfilling the requirements for valid
markings.
The Safe torque off function briefs the Safe torque off (STO) function of the drive
modules and gives instructions for its use.
Mains chokes briefs the optional mains chokes available for the drive.
EMC filters briefs the EMC filtering options available for the drive.
To Next Page
Loading...
