ABB AWT210 - Operation; Operator Page - Normal Conditions; Operator Page - Alarm Conditions

AWT210 | 2-WIRE CONDUCTIVITY, PH/ORP, PION TRANSMITTER | OI/AWT210-EN REV. C
19
7 Operation
Operator Page – normal conditions
Figure 17 Example Operator pages – normal conditions
Operator Page – alarm conditions
If any of the diagnostic alarms are active the NAMUR status of the device is indicated by displaying the class
and category of the highest priority active alarm.
Figure 18 Example Operator pages – alarm conditions
Read Only
Calibrate
Advanced
Service
Write Protected
Access level Process values
Operator pages can be
configured independently
to display:
Calibration
page
Operator
menu
PV
HART Tag (HART devices) or Tag Descriptor (FF and PA devices)
PV + temperature

PV + temperature + OP
(HART devices only
Failure
Check Function
Off Specification
Maintenance Required
Alarm class
Alarm category
Calibration
page
Operator
menu
Process