ABB AWT210 - Operator Menu Navigation and Signals View; Operator Menu Navigation

20 AWT210 | 2-WIRE CONDUCTIVITY, PH/ORP, PION TRANSMITTER | OI/AWT210-EN REV. C
…7 Operation
Operator menu
From the Operator menu, use the keys to highlight the
required menu and press the key to select:
Operator menus comprise:
• Diagnostics: displays a list of active diagnostic alarm

• Configuration: enters the Configuration level menus
page 28.
• Operator Page 1: displays the first Operator Page.
• Operator Page 2: displays the second Operator Page
(available only if Operator Page 2 enabled).
• Autoscroll: switches automatically between the two
Operator pages (available only if Operator Page 2 enabled).
• Signals View: displays a list of active signals.
Signals View
Operator Menu
Operator Page 1
Operator Page 2
Autoscroll
Signals view
Diagnostics
Conguration
Back Select
Signals View
PV 7.33 pH
SV 25.0 °pH
TV 37 KW
QV 1.06 mV
PV% 12.4 %
Back Exit
Signal
Sensor type
pH
Sensor type

Sensor type

Sensor type
toroidal conductivity
PV pH, ORP, Ion Conc or pION Conductivity or Concentration Conductivity or Concentration Conductivity or Concentration
SV Temperature Temperature Temperature Temperature
TV Reference impedance
Conductivity without
temperature compensation
Conductivity without
temperature compensation
Conductivity without
temperature compensation
QV pH, Cell output (mV) Conductivity Conductivity Conductivity

Primary variable percentage
of engineering range
Primary variable percentage
of engineering range
Primary variable percentage
of engineering range
Primary variable percentage
of engineering range
O/P
Current output
(HART versions only)
Current output
(HART versions only)
Current output
(HART versions only)
Current output
(HART versions only)
Table 1 Signals View/Sensor type values displayed