ABB AWT210 - Easy Setup - Toroidal Conductivity

AWT210 | 2-WIRE CONDUCTIVITY, PH/ORP, PION TRANSMITTER | OI/AWT210-EN REV. C
31
Toroidal conductivity
Used to setup standard parameters quickly.
Note. Easy Setup 
transmitters connected to toroidal conductivity sensor types.
Menu Comment Default
Language Selects the language to be displayed on screen:
English/Deutsch/Français/Español/Italiano
Note. The language options are displayed with localized spelling.
Measurement Type Selects a measurement type compatible with the connected sensor:
Conductivity/Concentration
Cell Solution Enabled only if Measurement Type = Concentration.
0-15% NaOH/0-20% NaCl/0-18% HCl/0-20% H2SO4/User Defined
Conc. Unit Sets the process value units.
Enabled only if Measurement Type = Concentration.
%/ppm/ppb/µg/l/mg/l
Conc. Curve Name Enabled only if Measurement Type = Concentration.
Temp. Unit Temperature unit displayed and applied to all temperature parameters/values.
Not enabled if Temperature Compensation Type = Manual.
°F/°C
 Selects range of values displayed on Operator Page 1 for examples of character formats/sizes.
PV/PV + Temperature/PV + Temp + PV%/PV + Temp + O/P
Easy Setup
Exit
Menu
Select