ABB AWT210 - Appendix B - Upgrading;Reloading; Factory Reset Switch

52 AWT210 | 2-WIRE CONDUCTIVITY, PH/ORP, PION TRANSMITTER | OI/AWT210-EN REV. C
Appendix B – Upgrading/Reloading
Factory reset switch
When this switch is set to the ON position and the instrument is
powered up, the instrument is reset to the factory default
values.
When the switch is in the OFF position the Factory Reset
function is disabled.
NOTICE
Resetting to factory default values resets all of the
instrument configuration parameters including passwords.
Acknowledgments
• Fieldbus is a registered trademark of the Fieldbus Foundation
• HART is a registered trademark of the FieldComm Group
• Modbus is a registered trademark of Schneider Electric USA Inc.
• PROFIBUS is a registered trademark of PROFIBUS organization