101
55°C
Max.
0°C
Min.
IP66/
NEMA4X
(front panel)
IP20
(rear)
0 to 90% RH
+
A – Within Temperature Limits
B – Within Humidity Limits
C – Within Protection Rating Limits
D – Use Screened Cables
6 INSTALLATION
EC Directive 89/336/EEC
In order to meet the requirements of the EC
Directive 89/336/EEC for EMC regulations, this
product must not be used in a non-industrial
environment.
Cleaning
Clean only the front panel, using warm water and a
mild detergent.
End of Life Disposal
This instrument does not contain any substance
that will cause undue harm to the environment.
However, the unit contains a small lithium battery.
This should be removed and disposed of
responsibly in accordance with local
environmental regulations. The remainder of the
unit can be safely considered as normal waste and
disposed of accordingly.
6.1 Mechanical Installation
6.1.1 Siting – Figs. 6.1 and 6.2
Caution. Select a location away
from strong electrical and magnetic
fields. If these cannot be avoided,
particularly in applications where ‘walkie
talkies’ are used, connect using
screened cables within grounded metal
conduit.
Fig. 6.2 Environmental Requirements
Sensor
Minimum
A – Close to Sensor
B – At Eye-level Location
C – Avoid Vibration
Fig. 6.1 General Requirements
To Next Page
Loading...
