ABB COMMANDER C355 - Cascade Control with Feedforward (Template 13)

28
70
FF
Master
Deviation
350.0
351.5
MST
1.000
C.rtO
OP1
•1
Slave
Deviation
SLV
0.0
C.bIA
OP1
•1
Slave
Deviation
SLV
…2 OPERATOR LEVEL
…2.8 Cascade Control with Feedforward (Template 13)
•1 Displayed only if enabled in Level B, Operator Configuration – see Section 5.7.
Feedforward Disturbance Variable
[0 to 100%]
Feedforward disturbance variable input.
Cascade Slave Set Point Ratio
[0.001 to 9.999]
Slave set point (CSP2) value =
(ratio x master ouput) + bias [in engineering units]
Cascade Slave Set Point Bias
[In engineering units]
Continued…