ABB COMMANDER C355 - Auto;Manual Station (Templates 3 and 4)

16
or
Low Master
Output Value
Digital Input
Active
or
•1
•2
•3
or
Restored
Master Output
Digital Input
Inactive
or
•1
•2
•3
50.0
55.0
70
50.0
55.5
50
M
•1 In template 4 the Auto/Manual switch is overridden by the digital input signal.
•2 Template 3 only – see Section 5.2, Basic Configuration/ Template Application.
•3 Template 4 only – see Section 5.2, Basic Configuration/ Template Application.
Auto Mode
Process Variable
Master Output (I/P2)
Control Output = Master Output
[Master Output, 0 to 100%]
Manual Mode
Control Output (under COMMANDER 350 control)
[0 to 100%]
…2 OPERATOR LEVEL
…2.3 Auto/Manual Station (Templates 3 and 4)