ABB COMMANDER C355 - Single Loop with Feedforward (Templates 9 and 10)

22
0.0
bIAS
OP1
•1
1.000
rAtO
70
PV – CSPt
Deviation
OP1
•1
…2 OPERATOR LEVEL
•1 Displayed only if template 10 selected – see Section 5.2, Basic Configuration/ Template
Application and Section 5.7, Operator Configuration/ Operator Ratio Display and Operator Bias
Display.
Remote Set Point Ratio
[0.001 to 9.999]
Remote set point value =
(ratio x remote set point input) + bias
Remote Set Point Bias
[In engineering units]
Continued…
…2.6 Single Loop with Feedforward (Templates 9 and 10)