ABB COMMANDER C355 - Indicator;Manual Loader Station (Templates 7 and 8)

20
350.0
351.5
70
OP1
•1
•2
PV1 – PV2
Deviation
…2 OPERATOR LEVEL
2.5 Indicator/Manual Loader Station (Templates 7 and 8)
One or two process variables can be displayed on the digital and bargraph displays. If the control
output is assigned to an analog output, the lower display indicates its value which can be adjusted by
the user.
•1 Displayed only if template 8 selected – see Section 5.2, Basic Configuration/ Template
Application.
•2 Displayed only if control output type is 'analog' (output is assigned to Analog Output 1).
Process Variable PV1
Process Variable PV2
Output Value
[–10 to 110%]