111
SPECIFICATION
Summary
17 application templates: Single loop,
Cascade, Feedforward, Ratio, Auto/Manual
Two Autotune options
Control Efficiency Monitor (CEM)
30 segments, 9 profiles
PC configuration
IP66/NEMA4X front face
Standard Functions
Control Strategies
Single-loop, Auto/manual Station, Analog Backup,
Indicator/Manual Loader, Cascade, Feedforward, Ratio
Output Types
Current proportioning, Time proportioning, On/off, Motorized valve
(with and without feedback), Heat/cool.
Control Parameters
Four sets of PI settings, selectable via digital signals
Set Points
Local, remote and four local fixed set points,
selectable via digital signals
30 segments, 9 profiles
Configured Outputs
Three preset output values, selectable via digital signals
Autotune
On demand for
1
/
4
wave or minimal overshoot
Process Alarms
Number 8
Types High/low process,
High/low output,
High/low deviation
Hysteresis Level and time *
Alarm enable/disable Enable/disable of alarms via digital signal
Real Time Alarms *
Number 2
Programmable On time/day and duration
* Accessed via PC Configurator
Analog Inputs
Universal Process Inputs
Number
2 standard
Type
Universally configurable to provide:
Thermocouple (THC)
Resistance thermometer (RTD)
mV
Volts
mA
Resistance
Non-universal Process Input
Number
1 standard
Types
mV (THC only if I/P1 is also THC)
mA
Operation
Display
1 x 4-digit, 14 mm (Red) LED, process variable
1 x 4-digit, 8 mm (Green) LED, set point
1 x 3-digit, 8 mm (Yellow) LED, output
1 x 21-segment deviation bargraph
Configuration
Basic configuration via front panel keys or PC
Advanced feature configuration by PC
Security
Password-protected menus
To Next Page
Loading...
