103
6 INSTALLATION…
…6.1.2 Mounting – Figs. 6.3 to 6.5
1
2
3
4
3
Cut a hole in the panel
(see Fig. 6.3 for dimensions).
Instruments may be close
stacked to DIN 43835
Insert the instrument
into the panel cut-out
Fit the panel clamps, ensuring that the
lugs are located correctly in their slots
Secure the panel clamp using the retaining screws.
The rubber friction sleeve prevents over-tightening.
Ground studs
Fig. 6.4 Mounting
To Next Page
Loading...
