EasyManua.ls Logo

ABB COMMANDER C355 - Appendix A: Control Templates; A1 Single Loop Controller (Templates 1 and 2)

ABB COMMANDER C355
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
113
SPECIFICATION
Options
Relay Outputs
Number 2
Type SPST, rated 5A at 115/230V AC
Digital Inputs
Number 2
Type Volt-free
Minimum pulse 200ms
Serial Communications
Connections RS485, 2- or 4-wire
Protocol Modbus RTU
Isolation Galvanically isolated from the rest of the
circuitry
Physical
Size
96 x 96 x 122.5mm (3.78 in. x 3.78 in. x 4.82 in.)
Weight
680g (1.5lb)
Electrical
Voltage
85 min. to 265 V max. AC 50/60Hz
24V DC
Power consumption
15VA max.
Power interruption protection
Up to 60ms
Safety
General safety EN 61010-1
Isolation
All inputs/outputs to earth: 500V DC
Analog/Digital output 1 to rest of the circuitry:
500V DC for 1 minute
Analog/Digital output 2 to rest of the circuitry:
500V DC for 1 minute
Serial communications to rest of the circuitry:
500V DC for 1 minute
Environmental
Operating Limits
0° to 55°C (32° to 130°F)
5 to 95%RH (non-condensing)
Temperature stability
<0.02%/°C or 2µV/°C (<0.011%/°F or 1.11µV/°F)
Long term drift <0.02% of reading or 20µV annually
Front face
NEMA4X (IP66)

Table of Contents

Related product manuals