ABB i-bus EIB

Commissioning
© 2006 ABB STOTZ-KONTAKT GmbH 238
ABB i-bus
®
EIB / KNX
Group address
Options: existing group address /
new group address
An existing group address can be assigned in the selection list.
The parameter is divided into Type, Name and No. The table can be
arranged and sorted as required.
The meaning of the individual columns is as follows:
Type
The type indicates which type of values a telegram with this group address
can send.
Name
The name of the group address is defined when configuring the ABB i-bus
®
installation and cannot be modified with the parameterisation software
PZM2.
No.
The number of the group address is the unique identifier of a group address.
“OK” button
When the “OK” button is pressed, the settings are adopted and the parameter
window closes.
“Cancel” button
When the “Cancel” button is pressed, the function is aborted and the
parameter window closes.
“Help” button
The “Help” file can be opened directly via the “Help” button and a further
parameter window Help for application program… is opened.