ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
120 2CDC508198D0211 Rev. A | AC/S 1.x.1
Duration section parameters
Before the start date the calendar function is inactive.
After the end data the calendar function is inactive. If no end date is defined, the calendar function is active
from the start date onward.
Parameter name
Value
Description
Start
Calendar day selection
Default = 01.01.2016
Before this date the element is inactive.
No End Optional
No End and End at Date are mutually exclusive.
Selecting No End activates the element
indefinitely.
End at Date:
Optional
Calendar day selection
Default = 01.01.2040
See above.
After this date the element is inactive.