ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Commissioning
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 39
6 Commissioning
6.1 Prerequisites for commissioning
To commission the device, a PC with ETS is required along with a connection to the ABB i-bus
®
, e.g. via a
KNX interface.
The device is ready for operation after connecting the bus voltage and the supply voltage.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English