ABB i-bus
®
KNX
Planning and application
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 481
12 Planning and application
In this chapter you will find some tips and application examples for practical use of the device.
12.1 Application examples
You will find application examples in the engineering guides at www.abb.com/knx.
12.2 Several devices per system
Several devices can be used per system. These can exchange data with each other using group
addresses. You can refer to other devices in the web user interface with the aid of the Link ASM.
Configurations can be copied between devices. See chapter 6.5.8, Copying, cutting and pasting.
To Next Page
Loading...
