ABB i-bus
®
KNX
Maintenance and cleaning
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 477
10 Maintenance and cleaning
10.1 Maintenance
The device is maintenance-free. In the event of damage, e.g. during transport and/or storage, repairs are
not allowed to be made.
10.2 Cleaning
Disconnect the device from the supply of electrical power before cleaning. If devices become dirty, they
can be cleaned using a dry cloth or a cloth dampened with a soapy solution. Corrosive agents or solutions
must never be used.
To Next Page
Loading...
