ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
410 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.14 Operating mode Scheduler WebUI ASM
7.14.1 General
This application-specific automation module (ASM) is a timer for the HVAC operating mode (Comfort,
Standby, Economy, Building Protection). The switching times are parametrized via the web user interface.
Switching commands can be set to the minute for each weekday, and exceptions (e.g. for holidays) can be
defined on a weekly, monthly and yearly basis.
The application controller outputs the switching command on the KNX bus, on the ASM output socket and
on BACnet.
Note
It is essential the clock in the application controller is set to operate this module.
7.14.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English