ABB i-bus KNX AC/S 1.x.1 Series - Group Objects

ABB i-bus
®
KNX
Parameters
318 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.10.4 Group objects
Object function
Name (can be
changed
separately)
Data point type
(DPT)
Length
Flags
C
R
W
T
U
I
Input: Supply temperature
Heat generator
9.001
2 bytes
x
x
x
Input: Return temperature Heat generator 9.001 2 bytes x x x
Output: Supply setpoint temperature Heat generator 9.001 2 bytes x x x
Input: Pump relay status Heat generator 1.001 1 bit x x x
Output: Heat generator On/Off Heat generator 1.001 1 bit x x x
Input: Heat generator operating status
Heat generator
1.011
1 bit
x
x
x
Input: Heat generator failure status
Heat generator
1.011
1 bit
x
x
x
In-/Output: Pump override disable/enable
Heat generator
1.003
1 bit
x
x
x
x
In-/Output: Pump override value
Heat generator
1.001
1 bit
x
x
x
x
Input: Pump operating status (Off/On) Heat generator 1.011 1 bit x x x
Input: Pump fault Heat generator 1.011 1 bit x x x
Input: Pump repair switch status Heat generator 1.011 1 bit x x x