ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
76 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.4 Automation ASM
7.4.1 General
Using this application-specific automation module (ASM), you can program your own ASMs with the aid of
a graphic logic editor. This is a solution for applications that are not covered by the predefined modules
supplied with the application controller.
You can define the input and output sockets on the custom modules as required. You can also define
read-only and other fields for the web user interface.
It is not possible to define group objects and BACnet objects directly from within custom ASMs. Input and
output sockets are to be used instead.
7.4.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English