ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 403
7.13 Heating/cooling changeover ASM
7.13.1 General
This application-specific automation module (ASM) selects the heating or cooling operating type currently
required for a system with heating and cooling functions. Depending on the setting made, the operating
type is calculated based on the outside temperature or on the supply temperature. The module outputs the
current operating type on the KNX bus, on the ASM output socket and on BACnet.
7.13.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English