ABB i-bus KNX AC/S 1.x.1 Series - Group Objects

ABB i-bus
®
KNX
Parameters
236 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.8.4 Group objects
Object function
Name (can be changed
separately)
Data point type
(DPT)
Length
Flags
C
R
W
T
U
I
Output: Cooling Building Protection
Room setpoint
temperatures
9.001
2 bytes
x
x
x
Output: Cooling Economy
Room setpoint
temperatures
9.001
2 bytes
x
x
x
Output: Cooling Standby Room setpoint
temperatures
9.001 2 bytes x x x
Output: Cooling Comfort Room setpoint
temperatures
9.001 2 bytes x x x
Output: Heating Comfort
Room setpoint
temperatures
9.001
2 bytes
x
x
x
Output: Heating Standby Room setpoint
temperatures
9.001 2 bytes x x x
Output: Heating Economy Room setpoint
temperatures
9.001 2 bytes x x x
Output: Heating Building Protection
Room setpoint
temperatures
9.001
2 bytes
x
x
x
Object function
Name (can be changed separately)
Data type
Flags
Output: Cooling Building Protection Room setpoint temperatures 2 bytes
DPT 9.001
C, R, T
The module has this output group object if the Yes option is selected for the Cooling Building Protection parameter.
Telegram value: 0...50 °C
Output: Cooling Economy
Room setpoint temperatures
2 bytes
DPT 9.001
C, R, T
The module has this output group object if the Yes option is selected for the Cooling Economy parameter.
Telegram value:
0...50 °C
Output: Cooling Standby
Room setpoint temperatures
2 bytes
DPT 9.001
C, R, T
The module has this output group object if the
Yes
option is selected for the
Cooling Standby
parameter.
Telegram value:
0...50 °C
Output: Cooling Comfort Room setpoint temperatures 2 bytes
DPT 9.001
C, R, T
The module has this output group object if the Yes option is selected for the Cooling Comfort parameter.
Telegram value: 0...50 °C