ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 235
Output sockets
Object name Data type
Cooling Building Protection
DPT 9.001
The module has this output socket if the Yes option is selected for the Cooling Building Protection parameter.
Signal value:
0...50 °C
Cooling Economy
DPT 9.001
The module has this output socket if the Yes option is selected for the Cooling Economy parameter.
Signal value: 0...50 °C
Cooling Standby
DPT 9.001
The module has this output socket if the Yes option is selected for the Cooling Standby parameter.
Signal value: 0...50 °C
Cooling Comfort
DPT 9.001
The module has this output socket if the Yes option is selected for the Cooling Comfort parameter.
Signal value: 0...50 °C
Heating Comfort
DPT 9.001
The module has this output socket if the Yes option is selected for the Heating Comfort parameter.
Signal value: 0...50 °C
Heating Standby
DPT 9.001
The module has this output socket if the Yes option is selected for the Heating Standby parameter.
Signal value: 0...50 °C
Heating Economy
DPT 9.001
The module has this output socket if the Yes option is selected for the Heating Economy parameter.
Signal value: 0...50 °C
Heating Building Protection
DPT 9.001
The module has this output socket if the Yes option is selected for the Heating Building Protection parameter.
Signal value: 0...50 °C