ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 231
Interfaces
The operating modes necessary for the application can be selected in the following by selecting the
checkboxes. For each operating mode activated
• An adjustable room setpoint temperature is displayed on the web user interface
• An initial room setpoint temperature is displayed in the Initial values parameter window
• An ASM output socket is displayed
• A group object is displayed
• A BACnet object is displayed
Cooling Building Protection
Options:
No (checkbox cleared)
Yes (checkbox selected)
Cooling Economy
Options:
No (checkbox cleared)
Yes (checkbox selected)
Cooling Standby
Options:
No (checkbox cleared)
Yes (checkbox selected)
Cooling Comfort
Options:
No (checkbox cleared)
Yes (checkbox selected)
Heating Comfort
Options:
No (checkbox cleared)
Yes (checkbox selected)
Heating Standby
Options:
No (checkbox cleared)
Yes (checkbox selected)
Heating Economy
Options:
No (checkbox cleared)
Yes (checkbox selected)
Heating Building Protection
Options:
No (checkbox cleared)
Yes (checkbox selected)