ABB i-bus KNX AC/S 1.x.1 Series - Page 122

ABB i-bus
®
KNX
Parameters
122 2CDC508198D0211 Rev. A | AC/S 1.x.1
Numeric Converter (N-CONV)
The converter allows you to link different data point types and convert them.
The following data types can be converted:
Data type
KNX data type
1 byte unsigned
5.xxx
1 byte signed
6.xxx
2 bytes unsigned
7.xxx
2 bytes signed
8.xxx
2 byte floating point
9.xxx
4 bytes unsigned
12.xxx
4 bytes signed
13.xxx
4 byte floating point
14.xxx
Inputs
No.
DPT
Abbr.
Name
Visible
Description
1
See above
E
Input
Always
2
See above
F
Factor
Parametrizable
3
See above
V
Offset
Parametrizable
Outputs
No.
DPT
Abbr.
Name
Visible
Description
1
See above
A
Output
Always
Parameters
Name
Value
Visible
Description
Factor
Single float
Always
Enables Factor input
Offset
Single float
Always
Enables Offset input