ABB i-bus KNX AC/S 1.x.1 Series - Page 131

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 131
Constant (CONST)
The constant can be used, for example, for the purposes of comparison with other input variables. The
constant never triggers a recalculation.
Outputs
No.
DPT
Abbr.
Name
Visible
Description
1
Any
O
Output
Always
Parameters
Name
Value
Visible
Description
Constant
value
According to DPT Always
For entering a constant value
Selecting the checkbox sets the initial value to 1, but
only with 1-bit values. Clearing the checkbox sets a
value of 0.